Home › Guides › Choosing a TPU for medical tubing

Choosing a TPU for medical tubing

Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.

Thermoplastic polyurethane is a standard material for catheter shafts, extension sets and other medical tubing. It is tough, kink-resistant and abrasion-resistant, bonds well with solvents and adhesives, and is plasticizer-free, which is often the reason teams move from PVC. MedResin lists 66 flexible TPU grades (Lubrizol 57, Covestro 9).

Decisions that matter most

  1. Polyether, polyester or polycarbonate soft segment. Polyether TPUs resist hydrolysis and are the usual choice for devices in contact with fluids or tissue. Polyester TPUs are more prone to hydrolysis. Polycarbonate-based TPUs were developed for better oxidative stability than polyethers in long-term implants.
  2. Aromatic or aliphatic. Aromatic (MDI-based) grades generally offer higher strength and chemical resistance but yellow with light and radiation. Aliphatic grades resist yellowing, which matters for clear tubing and gamma-sterilized products.
  3. Hardness. Lower Shore A grades give flexible, kink-resistant tubing; Shore D grades give the stiffness and pushability needed for catheter shafts. Many Lubrizol and Covestro grade names end in the nominal hardness (for example 80A or 55D); confirm on the data sheet.
  4. Sterilization. Every flexible TPU in MedResin is listed as not suitable for autoclave. EtO is stated for all of them. Gamma is stated as compatible for the aliphatic and Covestro Texin Rx grades and as limited for Lubrizol's aromatic grades, which the supplier says may discolor.
  5. Hydrophilic grades. Hydrophilic aliphatic TPUs absorb water and soften when hydrated. They are used where wet lubricity or hydrated softness is wanted, and their dimensions change with hydration.
  6. Biocompatibility claims vary by grade. Check the USP VI and ISO 10993 columns below and the grade pages. Many grades here have no USP Class VI or ISO 10993 statement in the cited source; request it from the supplier.

Lubrizol's sterilization statements are family-level guidance and, per the cited source, based on single-cycle testing. Validate multiple exposures or resterilization yourself.

TPU chemistries in MedResin

Supplier statements, grouped as each grade is listed.

Chemistry (as listed)GradesMakersGammaEtOAutoclaveVHP
TPU9Covestroyes (9)yes (9)no (9)not stated (9)
TPU (aliphatic polycarbonate)6Lubrizolyes (6)yes (6)no (6)yes (6)
TPU (aliphatic polyether)14Lubrizolyes (14)yes (14)no (14)yes (14)
TPU (aromatic polycarbonate)6Lubrizollimited (6)yes (6)no (6)yes (6)
TPU (aromatic polyester)5Lubrizollimited (5)yes (5)no (5)yes (5)
TPU (aromatic polyether)19Lubrizollimited (19)yes (19)no (19)yes (19)
TPU (hydrophilic aliphatic)7Lubrizolyes (7)yes (7)no (7)yes (7)

All 66 flexible TPU grades

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
GradeMakerFamilyUSP VIISO 10993GammaEtOAutoclaveVHPFDA file
Carbothane (aliphatic series)LubrizolTPU (aliphatic polycarbonate)✔✔no✔
Carbothane PC-3555DLubrizolTPU (aliphatic polycarbonate)✔✔no✔
Carbothane PC-3572DLubrizolTPU (aliphatic polycarbonate)✔✔no✔
Carbothane PC-3575ALubrizolTPU (aliphatic polycarbonate)✔✔no✔
Carbothane PC-3585ALubrizolTPU (aliphatic polycarbonate)✔✔no✔
Carbothane PC-3595ALubrizolTPU (aliphatic polycarbonate)✔✔no✔
Tecoflex (aliphatic series)LubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-100ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-60DLubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-65DLubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-68DLubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-72DLubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-80ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-85ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex EG-93ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex MG-8020LubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex MG-8812LubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex SG-60DLubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex SG-80ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecoflex SG-85ALubrizolTPU (aliphatic polyether)✔✔no✔
Tecophilic HP-60D-20LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic HP-60D-35LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic HP-60D-60LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic HP-93A-100LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic SP-60D-60LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic SP-80A-150LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Tecophilic SP-93A-100LubrizolTPU (hydrophilic aliphatic)✔✔no✔
Carbothane AC-4055DLubrizolTPU (aromatic polycarbonate)limited✔no✔
Carbothane AC-4065DLubrizolTPU (aromatic polycarbonate)limited✔no✔
Carbothane AC-4075ALubrizolTPU (aromatic polycarbonate)limited✔no✔
Carbothane AC-4075DLubrizolTPU (aromatic polycarbonate)limited✔no✔
Carbothane AC-4085ALubrizolTPU (aromatic polycarbonate)limited✔no✔
Carbothane AC-4095ALubrizolTPU (aromatic polycarbonate)limited✔no✔
Pellethane 5855-70D-WFLubrizolTPU (aromatic polyester)limited✔no✔
Pellethane 5855-92ALubrizolTPU (aromatic polyester)limited✔no✔
Tecothane Soft AR-75ALubrizolTPU (aromatic polyester)limited✔no✔
Tecothane Soft AR-85ALubrizolTPU (aromatic polyester)limited✔no✔
Tecothane Soft AR-95ALubrizolTPU (aromatic polyester)limited✔no✔
Pellethane 2363 SeriesLubrizolTPU (aromatic polyether)limited✔no✔MAF
Pellethane 2363-55DLubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-55DELubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-65DLubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-75DLubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-80ALubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-80AELubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-90ALubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 2363-90AELubrizolTPU (aromatic polyether)✔limited✔no✔
Pellethane 5863-85A-R1LubrizolTPU (aromatic polyether)limited✔no✔
Pellethane 5863-87A-R1LubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1055DLubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1065DLubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1069DLubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1072DLubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1074ALubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1075D-MLubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1085ALubrizolTPU (aromatic polyether)limited✔no✔
Tecothane TT-1095ALubrizolTPU (aromatic polyether)limited✔no✔
Texin RxS285CovestroTPU✔✔✔✔no
Texin RxS292CovestroTPU✔✔✔✔no
Texin RxT50DCovestroTPU✔✔✔✔no
Texin RxT65DCovestroTPU✔✔✔✔no
Texin RxT70ACovestroTPU✔✔✔✔no
Texin RxT76DCovestroTPU✔✔✔✔no
Texin RxT80ACovestroTPU✔✔✔✔no
Texin RxT85ACovestroTPU✔✔✔✔no
Texin RxT90ACovestroTPU✔✔✔✔no

Rigid TPU (6 grades, not for tubing)

Rigid aromatic TPUs are used for connectors, luers and housings that are often bonded to TPU tubing.

GradeMakerFamilyGammaEtOAutoclave
Isoplast 2510LubrizolRigid TPU (aromatic)limited✔no
Isoplast 2530 R1LubrizolRigid TPU (aromatic)limited✔no
Isoplast 2531LubrizolRigid TPU (aromatic)limited✔no
Isoplast 2540LubrizolRigid TPU (aromatic)limited✔no
Tecoplast OP-770 OpaqueLubrizolRigid TPU (aromatic)limited✔no
Tecoplast TP-470 ClearLubrizolRigid TPU (aromatic)limited✔no

See also: EtO-compatible materials for catheters and tubing · PEBA grades

Grade data last checked 2026-10-16. Blank cells mean not stated by the source. Each grade page cites its source. About the data · Suggest a correction

More guides: Which medical plastics survive gamma sterilization? · Autoclave-safe resins compared · USP Class VI vs ISO 10993 · EtO-compatible materials for catheters and tubing · All guides

Overview of every polymer group: Medical-grade plastics: grades by polymer and sterilization