Home › Polymer groups › Polypropylene › TECAPRO MT white

TECAPRO MT white

Ensinger · PP (stock shapes) · Polypropylene

Compare with similar PP (stock shapes) grades

Last verified: 2026-10-23 against the cited manufacturer source · Changelog

TECAPRO MT white is a PP (stock shapes) grade from Ensinger. The cited source lists it as compatible with steam/autoclave sterilization. Source

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.
USP VI stated yes
ISO 10993 stated yes
Gammanot stated
EtOnot stated
Autoclave stated yes
VHPnot stated
FDA master filenot stated
Autoclave / steam (as stated)No significant loss of mechanical properties to 800 steam cycles (134 °C); yellowing from about 200 cycles
ISO 10993 parts stated-1,-4,-5,-18 Source
Contact duration limitLimited (≤24 h): ≤24 h stated Source

Key properties (as stated on the data sheet)

PropertyValueTest standardConditionsSource
Tensile strength5040 psiASTM D638at yield, 73 °FData sheet (checked 2026-10-23)
Flexural modulus271000 psiASTM D79073 °FData sheet (checked 2026-10-23)

Typical values copied from the manufacturer's data sheet, not specification limits. Units and test methods are as the sheet states them; properties the sheet does not give are left out.

REACH SVHC: see the Ensinger SVHC note. Change notification: see the Ensinger policy note.

Data note: Stock shapes. Ensinger: ISO 10993-1, -4, -5, -18 for up to 24 h skin/tissue contact; semi-finished product tested to USP Class VI; suitable for repeated hot steam sterilization.
Related: All Polypropylene grades · PP (stock shapes) family · Autoclave-compatible grades · Gamma-stable polypropylene · USP Class VI plastics list · ISO 10993 tested plastics · Autoclave guide

Data sheet: https://www.ensingerplastics.com/en-us/shapes/pp-medical-tecapro-mt-white

Source: https://www.ensingerplastics.com/en-us/medical/rods-plates/pp

Additional source: https://www.ensingerplastics.com/en-us/shapes/pp-medical-tecapro-mt-white

Last verified: 2026-10-23 · How we source data · Changelog · Suggest a correction