Home › Polymer groups › Sulfones (PSU, PESU, PPSU) › TECASON P MT

TECASON P MT

Ensinger · PPSU (stock shapes) · Sulfones (PSU, PESU, PPSU)

Compare with similar PPSU (stock shapes) grades

Last verified: 2026-10-23 against the cited manufacturer source · Changelog

TECASON P MT is a PPSU (stock shapes) grade from Ensinger. The cited source lists it as compatible with steam/autoclave sterilization. Source

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.
USP VInot stated
ISO 10993 stated yes
Gammanot stated
EtOnot stated
Autoclave stated yes
VHPnot stated
FDA master filenot stated
Autoclave / steam (as stated)No significant loss of mechanical properties to 800 steam cycles (134 °C, 10 min)
ISO 10993 parts stated-1,-4,-5,-18 Source
Contact duration limitLimited (≤24 h): ≤24 h stated Source

Key properties (as stated on the data sheet)

PropertyValueTest standardConditionsSource
Tensile strength11000 psiASTM D638at yield, 73 °F (black)Data sheet (checked 2026-10-23)
Tensile modulus350000 psiASTM D63873 °F (black)Data sheet (checked 2026-10-23)
Flexural modulus325000 psiASTM D79073 °F (black)Data sheet (checked 2026-10-23)

Typical values copied from the manufacturer's data sheet, not specification limits. Units and test methods are as the sheet states them; properties the sheet does not give are left out.

REACH SVHC: see the Ensinger SVHC note. Change notification: see the Ensinger policy note.

Data note: Stock shapes, several colors. Ensinger: ISO 10993-1, -4, -5, -18 for up to 24 h skin/tissue contact. USP Class VI information is stated for the raw material only, so the USP column is left blank.
Related: All Sulfones (PSU, PESU, PPSU) grades · PPSU (stock shapes) family · Autoclave-compatible grades · ISO 10993 tested plastics · Autoclave guide

Data sheet: https://www.ensingerplastics.com/en-us/shapes/ppsu-biocompatible-tecason-p-mt-black

Source: https://www.ensingerplastics.com/en-us/medical/rods-plates/ppsu

Additional source: https://www.ensingerplastics.com/en-us/shapes/ppsu-biocompatible-tecason-p-mt-black

Last verified: 2026-10-23 · How we source data · Changelog · Suggest a correction