Home › Polymer groups › Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE) › THERMOLAST M MC/RS series (TMxRST)

THERMOLAST M MC/RS series (TMxRST) Series

KRAIBURG TPE · S-TPE · Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE)

Compare with similar S-TPE grades

Last verified: 2026-10-23 against the cited manufacturer source · Changelog

THERMOLAST M MC/RS series (TMxRST) is a S-TPE grade from KRAIBURG TPE. The cited source lists it as compatible with gamma, EtO and steam/autoclave sterilization. Source

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.
Series record: Series record: the source states values for the THERMOLAST M MC/RS series as a whole, not one compound. Values apply to the family or series as stated by the source; confirm the exact grade with the manufacturer.
USP VInot stated
ISO 10993Cytotoxicity only ISO 10993-5 cytotoxicity is the only part stated; not counted as ISO 10993
Gamma stated yes
EtO stated yes
Autoclave stated yes
VHPnot stated
FDA master fileDMF
Gamma dose (as stated)2 x 35 kGy (as stated)
Autoclave / steam (as stated)134 °C (as stated; cycle count not stated)

Key properties (as stated on the data sheet)

PropertyValueTest standardConditionsSource
Tensile strength7.5–10.0 MPaDIN 53504/ISO 37series-level range across compounds TM3RST and TM4RST, 33–43 Shore A; S2 test piece, 200 mm/minData sheet (checked 2026-10-23)
Density0.890 g/cm³DIN EN ISO 1183-1series-level range across compounds TM3RST and TM4RST, 33–43 Shore AData sheet (checked 2026-10-23)

Typical values copied from the manufacturer's data sheet, not specification limits. Units and test methods are as the sheet states them; properties the sheet does not give are left out.

REACH SVHC: see the KRAIBURG TPE SVHC note. Change notification: see the KRAIBURG TPE policy note.

Data note: Series record from the KRAIBURG TPE medical brochure: ISO 10993-5 (cytotoxicity) only; US DMF listed. Sterilizable as stated: autoclave 134 °C, beta/gamma radiation 2 x 35 kGy, EtO. Confirmed against the KRAIBURG TPE series data sheet (checked 2026-10-23): Data sheet lists ISO 10993-5 (cytotoxicity) only; US DMF listed. Sterilizable as stated (autoclave 134 °C, beta/gamma 2 x 35 kGy, EtO). KRAIBURG notes that approvals are shown for the series collectively and not every one applies to each compound.
Related: All Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE) grades · S-TPE family · Gamma-compatible grades · EtO-compatible grades · Autoclave-compatible grades · Gamma sterilization guide · Autoclave guide

Data sheet: https://pdb.kraiburg-tpe.com/tpepdb/pdf?sid=90&l=en&datasheetmode=datasheet

Source: https://www.kraiburg-tpe.com/sites/default/files/uploads/dateien/downloads/2025-04/KRAIBURG-TPE_market-brochure_Medical_English.pdf

Additional source: https://pdb.kraiburg-tpe.com/tpepdb/pdf?sid=90&l=en&datasheetmode=datasheet

Last verified: 2026-10-23 · How we source data · Changelog · Suggest a correction