Home › Polymer groups › Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE) › THERMOLAST M MC/tl series (TMxMED)

THERMOLAST M MC/tl series (TMxMED) Series

KRAIBURG TPE · S-TPE · Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE)

Compare with similar S-TPE grades

Last verified: 2026-10-23 against the cited manufacturer source · Changelog

THERMOLAST M MC/tl series (TMxMED) is a S-TPE grade from KRAIBURG TPE. The cited source lists it as compatible with gamma, EtO and steam/autoclave sterilization. Source

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.
Series record: Series record: the source states values for the THERMOLAST M MC/tl series as a whole, not one compound. Values apply to the family or series as stated by the source; confirm the exact grade with the manufacturer.
USP VI stated yes
ISO 10993 stated yes
Gamma stated yes
EtO stated yes
Autoclave stated yes
VHPnot stated
FDA master fileDMF
Gamma dose (as stated)2 x 35 kGy (as stated)
Autoclave / steam (as stated)134 °C (as stated; cycle count not stated)

Key properties (as stated on the data sheet)

PropertyValueTest standardConditionsSource
Tensile strength6.5–17.0 MPaDIN 53504/ISO 37series-level range across compounds TM3MED–TM9MED, 27–89 Shore A; S2 test piece, 200 mm/minData sheet (checked 2026-10-23)
Density0.880–0.890 g/cm³DIN EN ISO 1183-1series-level range across compounds TM3MED–TM9MED, 27–89 Shore AData sheet (checked 2026-10-23)

Typical values copied from the manufacturer's data sheet, not specification limits. Units and test methods are as the sheet states them; properties the sheet does not give are left out.

REACH SVHC: see the KRAIBURG TPE SVHC note. Change notification: see the KRAIBURG TPE policy note.

Data note: Series record from the KRAIBURG TPE medical brochure: ISO 10993-4, -5, -10, -11 and USP <88> Class VI; US DMF listed. Sterilizable as stated: autoclave 134 °C, beta/gamma radiation 2 x 35 kGy, EtO. Confirmed against the KRAIBURG TPE series data sheet (checked 2026-10-23): Data sheet lists ISO 10993-4, -5, -10, -11 and USP <88> Class VI; US DMF listed. Sterilizable as stated (autoclave 134 °C, beta/gamma 2 x 35 kGy, EtO). KRAIBURG notes that approvals are shown for the series collectively and not every one applies to each compound.
Related: All Styrenics (ABS, ASA, MABS, MBS, SAN, SBC, SMMA, S-TPE) grades · S-TPE family · Gamma-compatible grades · EtO-compatible grades · Autoclave-compatible grades · USP Class VI plastics list · ISO 10993 tested plastics · Gamma sterilization guide · Autoclave guide

Data sheet: https://pdb.kraiburg-tpe.com/tpepdb/pdf?sid=79&l=en&datasheetmode=datasheet

Source: https://www.kraiburg-tpe.com/sites/default/files/uploads/dateien/downloads/2025-04/KRAIBURG-TPE_market-brochure_Medical_English.pdf

Additional source: https://pdb.kraiburg-tpe.com/tpepdb/pdf?sid=79&l=en&datasheetmode=datasheet

Last verified: 2026-10-23 · How we source data · Changelog · Suggest a correction