Home › Polymer groups › PEEK › Ketron LSG PEEK-CLASSIX

Ketron LSG PEEK-CLASSIX

Mitsubishi Chemical Advanced Materials · PEEK (stock shapes) · PEEK

Compare with similar PEEK (stock shapes) grades

Last verified: 2026-10-23 against the cited manufacturer source · Changelog

Ketron LSG PEEK-CLASSIX is a PEEK (stock shapes) grade from Mitsubishi Chemical Advanced Materials. Source

Data comes from public supplier literature (cited on each grade page). A blank cell means not stated in the source, not "no". Always confirm with the supplier's current documentation before use.
Reference only: Compiled from public manufacturer literature for reference only; it may be incomplete or outdated. Before using any grade in a device, verify the current manufacturer data sheet and complete your own testing and regulatory review.
USP VI stated yes
ISO 10993 stated yes
Gammanot stated
EtOnot stated
Autoclavenot stated
VHPnot stated
FDA master filenot stated
Contact duration limitProlonged (24 h to 30 days): up to 30 days body contact stated Source

Key properties (as stated on the data sheet)

PropertyValueTest standardConditionsSource
Tensile strength115 MPaISO 527-1/-2Data sheet (checked 2026-10-23)
Tensile modulus4600 MPaISO 527-1/-2Data sheet (checked 2026-10-23)
Flexural modulus600 kpsiASTM D790Data sheet (checked 2026-10-23)
Heat deflection temperature (HDT)165 °CISO 75-1/-21.8 MPaData sheet (checked 2026-10-23)
Density1.39 g/cm³ISO 1183-1Data sheet (checked 2026-10-23)

Typical values copied from the manufacturer's data sheet, not specification limits. Units and test methods are as the sheet states them; properties the sheet does not give are left out.

REACH SVHC: see the Mitsubishi Chemical Advanced Materials SVHC note. Change notification: see the Mitsubishi Chemical Advanced Materials policy note.

Data note: Stock shapes (white). Data sheet: pre-assessed to USP Class VI and ISO 10993 for body and tissue contact up to 30 days. Sterilization methods not listed by name.
Related: All PEEK grades · PEEK (stock shapes) family · Can PEEK be autoclaved? · USP Class VI plastics list · ISO 10993 tested plastics

Data sheet: https://www.mcam.com/mam/56091/AEP-Ketron%E2%84%A2%20LSG%20PEEK-CLASSIX%E2%84%A2%20_en_US.pdf

Source: https://www.mcam.com/mam/56091/AEP-Ketron%E2%84%A2%20LSG%20PEEK-CLASSIX%E2%84%A2%20_en_US.pdf

Last verified: 2026-10-23 · How we source data · Changelog · Suggest a correction